CNC Router Bits

Carbide Compression Router Bits Double Spiral Bits for MDF Laminate Carving

Carbide Compression Router Bits Double Spiral Bits for MDF Laminate Carving

Material: carbide
Model: Carbide Compression Bits
Brand: RICOCNC
Product description: Carbide Compression Router Bits Double Spiral Bits for MDF Laminate Carving The part of the bit closest to the tip is upcut and the other end is downcut. That is why it’s called a compression router
INQUIRY EMAIL

Carbide Compression Router Bits Double Spiral Bits for MDF Laminate Carving

The part of the bit closest to the tip is upcut and the other end is downcut. That is why it’s called a compression router bit. It compresses the chips into the center of the bit.
Spiral router bits leave a clean edge on the top or bottom surface, depending on the direction of the cut. So we have up cut spiral router bits and down cut spiral router bits.

Compression spiral router bits are an excellent choice for woodworkers who must have a clean top and bottom surface, as they have a Up-Cut design on the tip of the bit and a Down-Cut design ground into the shank.
Designed to provide a smoother finished cut and router wood and wood composites where upward/ downward chip removal, long life and quality finish are desired. It’s great for cutting openings in wood.

This makes it especially great for plywood, laminates and MDF when you need both the top and bottom edges clean. You just have to make sure that the piece of wood you are cutting is thick enough so that both ends of the bit have room to work. Both the top and bottom are cut perfectly clean.

Choose from our large variety of solid carbide spiral compression router bits below. They are widely used on CNC and other automatic routers as well as hand-held router and table-mounted portable routers.

Double Compression Router Bits sizes:

Item No.	CED (mm)	CEL (mm)	SHK (mm)	OVL (mm)
A2FLX3.12	3.175	12	3.175	40
A2FLX3.17	3.175	17	3.175	45
A2FLX3.22	3.175	22	3.175	50
A2FLX3.25	3.175	25	3.175	55
A2FLX3.32	3.175	32	3.175	65
A2FLX412	4	12	4	45
A2FLX417	4	17	4	50
A2FLX422	4	22	4	55
A2FLX425	4	25	4	60
A2FLX512	5	12	5	50
A2FLX517	5	17	5	50
A2FLX522	5	22	5	55
A2FLX610	6	10	6	50
A2FLX612	6	12	6	50
A2FLX617	6	17	6	50
A2FLX622	6	22	6	55
A2FLX625	6	25	6	60
A2FLX628	6	28	6	65
A2FLX635	6	35	6	80
A2FLX820	8	20	8	60
A2FLX825	8	25	8	60
A2FLX835	8	35	8	80
A2FLX845	8	45	8	90
A2FLX1025	10	25	10	60
A2FLX1035	10	35	10	80
A2FLX1045	10	45	10	90
A2FLX1235	12	35	12	90
A2FLX1245	12	45	12	100
A2FLX12.35	12.7	35	12.7	90
A2FLX12.45	12.7	45	12.7	100
A2FLX12.55	12.7	55	12.7	110
A2FLX1645	16	45	16	110
A2FLX1655	16	55	16	120
A2FLX1675	16	75	16	140
A2FLX2045	20	45	20	100
A2FLX2075	20	75	20	150

We also supply single spiral compression router bits and triple spiral carbide compression router bits.
Every woodworker knows - the right router bit makes all the difference in creating great work. Choose the good bits makes the work become easy.

If any interests in our cnc cutter bits, Welcome your inquiries.