Flat Grid Table Vacuum Cups for Woodworking Matrix Table CNC Routers

Flat Grid Table Vacuum Cups for Woodworking Matrix Table CNC Routers

A lot of CNC router users own flat table CNC, as it is fast and good for big sheet nesting, also cheaper than pod and rail CNC machines. But if you are machining custom parts made out of solid wood that requires machining on the side and bottom of the part, to process the side of the part with horizontal boring, machining, cutting, etc. A flat table can't perform those functions easily.

But now our flat table vacuum cups will allow your shop to do solid wood work or edge detail by raising the material off of the table. You can use your matrix table CNC router as a pod and rail CNC router. CNC vacuum pods: CNC vacuum hold down block devices for CNC router vacuum table.

Maximize the flexibility of your flat table with matrix table cups: use a rubber gasket seals a zone for the Flat Table Pod around the vacuum table hole area. Put the Grid and Flat Table Pods on the matrix table, there are iron strip to locate the vacuum pod. The bottom iron strip width have 6mm and 8mm for choose for your grid table grooves.

Connect the CNC vacuum pods with the vacuum pump with 8mm diameter air pipe. (Optional: you can put the vacuum pod on your flat table vacuum hole, plug up the vacuum pod air pipe, so no need for the extra air pipe.)

When vacuum pump works, the vacuum pod clamps the flat table and the workpiece both tightly.

The top vacuum suction size has 3 models:
• Full size flat table vacuum cups 145x132mm
• Half size flat table vacuum pods 75x132mm
• 1/3 size flat table vacuum blocks 54x132mm
The height of the vacuum pods can be customized, the minimum is 29mm tall.

48mm and 74mm tall pods are widely used, like Biesse Rover CNC vacuum pods.

RicoCNC supplies a range of CNC vacuum pods for nearly all woodworking CNC routers, such as Biesse, SCM, Homag, Weeke, Anderson, Omnitech, Busellato, CMS, CR Onsrud, Format 4, Hendrick, Heian, HolzHer, Komo, Multicam, SCMI Morbidelli, Northwood, KDT, SNX, SCM Routech, Masterwood, Thermwood, Bacci, Excitech, Nanxing, & many more.

Spare parts for CNC router vacuum pods also are available here. If you are in need of any CNC vacuum cups or accessories, welcome to contact us.